Grease Monkey™ Rust Inhibitor (5 Gal)

Grease Monkey™ Rust Inhibitor (5 Gallons)

Grease Monkey™ Rust Inhibitor is an industrial-strength solution specifically formulated to prevent rust on ferrous metals after sandblasting or chemical stripping. This powerful formula offers up to 72 hours of corrosion protection, giving you ample time for painting, powder coating, or other finishing processes. Ideal for both wet blasting systems and dry blasting applications.

How to Use

• Surface Preparation: Sandblast or chemically strip the metal to bare surface. Rinse thoroughly to remove any residue or media.
• Application: Fully saturate the clean, bare metal using a sprayer, dip tank, or brush. Ensure all surfaces are completely covered.
• Drying: Allow the part to air dry naturally in a clean, dry area.
• Storage: Once dry, the part remains protected for up to 72 hours before final coating.

Product Highlights

• Up to 72 hours of rust inhibition on bare ferrous metal surfaces.
• Compatible with wet or dry blasting systems.
• Easy, effective protection between prep and finishing stages.
• Proudly manufactured in the USA by Cherokee Chemical Company (Centre, AL).

Safety Information

• DANGER: Keep out of reach of children.
• Harmful or fatal if swallowed.
• In case of skin or eye contact, rinse with water for several minutes. If irritation persists, seek medical attention.
• Always review the Safety Data Sheet (SDS) before use.
• For emergencies, contact the National Poison Control Hotline at 1-800-222-1222.

Protect your metal investments with Grease Monkey™ Rust Inhibitor—your go-to solution for reliable short-term corrosion prevention between surface prep and final finish.