Grease Monkey™ Crete-Ease Concrete & Lime Remover (1 Gallon)

Grease Monkey™ Crete-Ease is a powerful, acid-based cleaner formulated to safely and effectively remove hardened concrete mortar, lime scale, efflorescence, rust deposits, and other mineral build-up from a variety of surfaces. Whether you’re preparing a new pour or restoring existing concrete, tile, brick, stone, or masonry, Crete-Ease cuts through tough residues with minimal scrubbing—leaving surfaces clean and ready for sealing, painting, or ongoing maintenance.

Key Features

• Fast-Acting Acid Formula
  Contains 10–13% glycolic acid, which penetrates and dissolves mineral deposits quickly without the need for harsh mechanical abrasion.

• Versatile Use
  Safe for use on concrete, ceramic tile, pavers, brick, block, natural stone (test first on sensitive surfaces), grout, metal tools, and equipment.

• Easy Application
  Available in a liquid concentrate for use with standard low-pressure sprayers or foamers. No special equipment required.

• Economical & Concentrated
  A little goes a long way—dilutable for light cleaning, full-strength for heavy build-up. Ideal for both professionals and DIYers.

• Biodegradable, Non-Fuming
  Glycolic acid is readily biodegradable; Crete-Ease generates minimal vapors compared to stronger hydrochloric or muriatic acids.

Benefits

• Restores Original Appearance
  Eliminates unsightly white residue, stains, and discoloration, bringing back the natural color and texture of masonry surfaces.

• Prepares for Next Steps
  Ensures proper adhesion for sealers, paints, coatings, and overlays by removing contaminants that inhibit bonding.

• Protects Substrate Integrity
  Low-pH formulation minimizes edge etching or surface damage compared to stronger mineral acids when used as directed.

• Time & Labor Savings
  Reduces manual scrubbing and wire-brushing—spray on, rinse off, and repeat only if necessary.

Typical Applications

• New Construction: Clean off mortar smears, grout haze, and efflorescence from poured concrete, blocks, pavers, or tile installations.

• Restoration & Maintenance: Remove lime scale, rust, and mineral deposits from driveways, sidewalks, patios, pool decks, and equipment.

• Industrial Equipment: Strip hardened cement slurry from mixers, trucks, molds, and tools.

Directions for Use

1. Shake Well before opening.

2. Apply full-strength (undiluted) directly to the target area using a low-pressure sprayer or foamer.

3. Allow product to dwell 5–15 minutes, keeping the surface wet.

4. Agitate lightly with a brush for stubborn spots, if needed.

5. Rinse thoroughly with clean water—preferably high-pressure rinse.

6. Repeat application in high-build areas until clean.

Dilution Tips:

• For light haze or surface films, dilute 1:1 with water.

• For medium deposits, use 75% product / 25% water.

• For severe build-up or industrial equipment, use undiluted.

Safety & First-Aid

• Keep Out of Reach of Children.

• Harmful or Fatal if Swallowed.

• In case of skin or eye contact, flush immediately with plenty of water for at least 15 minutes. Remove contaminated clothing.

• If irritation persists, seek medical attention.

• Do Not Ingest—if swallowed, do not induce vomiting; call the National Poison Control Hotline at 1-800-222-1222 immediately.

• Consult the SDS for full health and safety information before use.

Technical Data

• Active Ingredient: Glycolic acid 10–13%

• pH: ~1.5 (acidic)

• Appearance: Clear to pale yellow liquid

• Odor: Mild, characteristic of glycolic acid

• Biodegradability: Readily biodegradable